Troubleshooting - Sony Cyber-shot DSC-G3 Instruction Manual

Troubleshooting
If you experience trouble with the camera, try the following solutions.
O Check the items below, and refer to "Cyber-shot Handbook" (PDF).
It a code such as "C/E:[-II-I:[-II-I" appears on the screen, refer to "Cyber-shot
Handbook".
v
O Removethe batterypack,wait for aboutoneminute,re-insertthe battery
pack,thenturnon the power.
v
O Initializethe settings(page50).
v
O Consult yourSonydealer or localauthorized Sonyservicefacility.
On repairing cameras with internal memory or Music files function included, data in the
camera may be checked on minimum necessity to verify and improve the malfunction
symptoms. Sony will not copy or save any of those data.
Cannot insert the battery pack.
• Insert the battery pack correctly to push the battery eject lever (page 15).
Cannot turn on the camera.
• After inserting the battery pack into the camera, it may take a few moments for the camera to
power up.
• Inserl the battery pack correctly (page 15).
• The battery pack is discharged. Insert a charged battery pack (page 13).
• The batte U pack is dead. Replace it with a new one.
• Use a rccommended battery pack.
The power turns off suddenly.
• If you do not operate the camera for about three minutes x_hile the power is on, the camera
turns ofl' automatically to prevent wearing down the battery pack. Turn on the camera again
(page 17).
• The battery pack is dead. Replace it with a new one.
58