Download Print this page

Pioneer PD-F606 Operating Instructions Manual page 3

File-type compact disc player
Hide thumbs Also See for PD-F606:

Advertisement

IMPORTANT |
Tha lightning flash with arrowhead, within
an equilateral
triangle, is intended to alert the user to the presence of
uninsulated 'dangerous voltage' within the product's
enclosure that may be of sufficient magnitude to
constitute a risk of siectric shock to persons,
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
ge:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK}, NO USER-SERVICEABLE
PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Rterature accompanying the eppliance.
The exclamation point within an equilateral triengle is
intended to slert the user to the presence of important
operating and maintenance (servicing) instructions in the
Do not connect either wite to the aarth terminal of &
three-pin plug,
The cut-off plug should be disposed of and must not be
inserted into any 13 amp socket as this can result in electric
shock. The plug or adaptor of the distribution pane! should
be provided with a 5 amp fuse. As the colours of the wires
NOTE
in the mains jead of this eppliance may not correspond with
After replacing or changing a fuse, the fuse cover in the
coloured markings identifying the terminats in your plug.
plug must be replaced with a fuse cover which corre-
proceed as fotiows
sponds to the colour of the insert in the base of the plug
The wire which is coloured blue must be connected to the
or the word that is embossed on the base of the plug, and
terminal which is marked with the jettes N or coloured black.
the appliance must not be used without 8 fuse cover. If
IMPORTANT
FOR USE IN THE UNITED
KINGDOM
'The wires in this mains lead are coloured in
accordance with the following code :
Biue:
Neutral
The following caution label appears on your player.
[FOR EUROPEAN AND U.K. MODELS]
CAUTION
Location: rear of the player
This product contains
a laser diode of higher
class than 1. To ensure continued safety, do not
remove any covers or attempt to gain access to
the inside of the product.
Refer all servicing to qualified personnel.
CLASS 1
LASER PRODUCT
VRW-328
ONI
~ Reorient or relocate the receiving antenna.
~ Increase the separation between the equipment and receiver.
~ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
~ Consult the dealer or an experienced radio/TV technician for help.
Information to User
Alteration or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment.
THE POWER
SWITCH
IS SECONDARY
CONNECTED
AND
THEREFORE DOES NOT SEPARATE THE UNIT FROM MAINS
POWER IN THE STANDBY POSITION.
(For U.K. and European models)
This product complies with the Low Voltage Directive (73/23/
EEC), EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking
Directive (93/68/EEC).
{For Canadian model]
CAUTION: To PREVENT ELECTRIC SHOCK DO NOT
USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
ATTENTION:
pour
PREVENIR
LES CHOCS
ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE
AVEC UN PROLONGATEUR, UNE PRISE DE COURANT OU
UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES
PEUVENT ETRE iNSEREES A FOND SANS EN LAISSER
AUCUNE PARTIE A DECOUVERT
[For Canadian model]
This Class B digital apparatus meets all requirements of the
Canadian interference~Causing Equipment Regulations.
{Pour le modéle Canadien]
Cet appareil numérique de la Classe B respecte toutes les
exigences
du
Régiement
sur fe matériel
brouilleur
du
Canada.
3
<PRB1252>
En

Advertisement

loading

This manual is also suitable for:

Pd-f506