Advertisement
VARIOUS
To program tracks/discs in a desired
order (PROGRAM play)
@
You can operate PD-F606 by remote control unit and also by the
main unit.
@
You can program up to 24 steps
@ The parenthesis { ) show operations for the main unit.
qq
Operation example)
Programming disc 2, track 7 as step 1,
and disc 5, track 3 as step 2.
Press PGM(PROGRAM) dur-
ing stop mode.
PGM
Use the digit buttons to
select the disc, and press
DISC SET.
(Use DISC (-, +) to select the disc
number, then press PROGRAM.}
The "PGM" indicator blinks
Use the digit buttons to
select the track, and press
TRACK SET.
(Use wé<i/mR1 to select the track
number.)
Repeat steps 2 and 3 to pro-
rr
gram additional discs and
~
tracks.
Once
the
track times have been
added, the PGM
indicator stops
blinking and the following display
appears (Total Time).
(
12
<PRB1252>
En
Soe
OPERATIONS
=
Press >.
The program
play starts from the
track that was programmed first.
The following operations can only be performed
during normal play
<Programming tracks during normal play>
(Direct program)
1. Press PGM.
*Program mode is activated.
2. Press PGM during playback.
eThe current track is programmed
<Programming during normal playback>
(Pre-programming)
You can program during normal playback
(=> Operation example WHY VY )
*
The player changes to program
play when the current track
finishes playing back.
*
To change to program mode directly, press >.
The following operations can only be performed
during stop mode
<Programming an entire disc as one step>
(Full disc program)
If you skip step Y of the operation example, disc 2 is programmed
as step 1.
<Programming a pause (with remote control)>
(Pause program)
If you press Wat stepY, you can program a pause. When you press
tt, "PA" appears in the display instead of the disc number.
@
For example, when making a program for recarding both sides of
a Cassette tape, press #1 to insert a pause after programming the
tracks for one side. After turning the tape over, press fl to resume
recording.
Notes
@ You cannot program a pause as the first step, or program two
pauses ina row.
@ When you program a pause, it counts as 1 step and reduces the
total number of tracks you can program.
To erase a program...
Press ™ twice during playback (or once in stop moda). Press
MODE or RANDOM in either play or stop mode. You can also
erase the program by pressing PREVIOUS .
To cancel a program step
=
In stop mode, each time you press CLEAR on the main unit, the
last step in the program is erased.
@ f a programmed disc is missing or inserted backwards during
program play, "**-ne diISC" appears in the display, the step is
automatically erased, and playback proceeds to the next step.
@ Program contents are stored in memory even when the power
is turned off (STANDBY),
Notes!!
e@
You cannot program during playback.
e
ff step Vis carried out before the accumulated time is
displayed, the program play starts and the time is not displayed.
Advertisement
