Panasonic Omnivision PV-V4540 Operating Instructions Manual page 7

f the remote control POWER, ACTION, PROG/VCR+, CH4/¥, NUMBERED keys,
INPUT, SEARCH or ADD/DLT button does not work when pressed, press the VCR
"Important:
button on the remote and try the button again.
Start Channel Auto Set
CHANNEL/ CLOCK AUTO SET
CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE
BOX, TUNE IT TO YOUR
LOCAL PBS CH THEN..
PLEASE PUSH CH UP KEY
| CH AUTO SET PROCEEDING |
| AUTO CLOCK SET |
PROCEEDING
Y (Setup completed)
1/ 4/2000 TUE 12:00PM
DST : ON
SETTING : CH 02
AUTO CLOCK SET
COMPLETED
END : PUSH CH UP KEY
«TRACKING»
Press CHA
to exit.
* If your area observes DST (daylight
saving time}, but the time is incorrect;
do the "Time Zone Adjust" steps on page 35.
ACTION
PAUSE CM SKIP SPEED SEARCH
Of
and Clock Auto Set.
Press CH A.
IMPORTANT NOTE FOR
AUTO CLOCK SET
¢ Auto clock set is performed the
first time the VCR is turned off
each day. If used, a cable box
must be left on and tuned to the
PBS channel at the time VCR
power is turned off if you want auto
clock set to be done.
lf used, a DSS receiver must be
turned off for auto clock set.
If Cable Box or DSS receiver is
connected to VCR via Audio/Video
jacks, an RF coaxial cable must
also be connected for auto clock
set and channel auto set features
to work.
(Setup incomplete)
Clock Setup incomplete.
Set the clock manually.
a 1) Press ACTION.
AUTO CLOCK SET
IS INCOMPLETE
PUSH ACTION TO SET CLOCK
i | SET CLOCK
DN
SELECT:A ¥ KEY
SET ¿> KEY
END ¡ACTION KEY
2) Press AY to
select month.
3) Press > to set.
* Likewise, set date, year, time,
DST (Daylight Saving Time).
To Make Corrections,
repeatedly press «€ > to move to
error, then correct.
A 4} Press ACTION.
SET CLOCK
1/ 4/2000 TUE 12:00PM
(Clock starts.)
* To exit this
mode, press
SET
:«d > KEY
>
;
START :ACTION KEY ACTION again.
* VCR calendar is accurately maintained to
Dec. 31, 2096 11:59PM.
* Channel auto set selects normal TV or Cable
channels depending on your VCR hookup.
+ To reset Language, Channels, Clock or
VCR's Output Channel see pages 34 and 35.
Using AV<4P keys
You can also operate the menu
screen using VCR buttons.
When menu screens are
displayed, the PLAY, STOP, (EE)
REWIND, and FF buttons on ES
the VCR and remote function E
as AY «4» only with no tape
inserted.
To display menu using VCR
buttons, press CH à and CH
Y together.
To exit the menu, repeat above.
On Remote
A : PLAY «4: REW
v: STOP »:FF
dnya 4 au Sun