Panasonic PV-V4524SK Operating Instructions Manual

Location of Controls
Remote Control Buttons
EJECT
(Ejects tape)
POWER
(Turns VCR off/on)
NUMBER Keys
(Selects channel directly)
INPUT
(For LINE or channel)
ADD/DELETE
(Adds or deletes a channel)
PAUSE/SLOW
(Displays still, frame by frame,
or slow motion picture)
ACTION
(Displays menu)
PROGRAM
(Displays Timer Program screen)
SAP/Hi-Fi
(Selects audio mode for play
or record)
VOLUME +/-
(Adjusts TV volume)
RECORD
(Records a program, etc.)
SPEED
(Changes tape speed)
COMMERCIAL SKIP/
ZERO SEARCH
(Starts COMMERCIAL SKIP/
Zero Search)
Remote Control
EJECT button:
Multi Function Display (FRONT DISPLAY)
Power Indicator
Lights up when power is on.
Clock/ Status/ Channel/ Speed Display
Displays current time. Briefly displays VCR
status when you press a function button,
channel number or "L1" or "L2" when you
select channel or line input, and recording
speed when you press SPEED.
Montréal: 3075 Louis A. Amos, Lachine, Québec H8T 1C4 (514) 633-8684
Toronto: 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-8447
Calgary: 6835 8th Street N.E., Calgary, Alberta T2E 7H7 (403) 295-3955
Vancouver: 12111 Riverside Way, Richmond, BC V6W 1K8 (604) 278-4211
Panasonic Canada Inc.
5770 Ambler Drive, K
Mississauga, Ontario L4W 2T3
(905) 624-5010
www.panasonic.ca
Printed in Indonesia
LSQT0815 A
S1203-1024
- 8 -
V4524S-K Basic-1 (040205) new form.p65 1
LSQT0815A (E) Basic OP - Front (040206)
Location of Controls / Reset All VCR Memory Functions
Front View of the VCR
Cassette Compartment
VCR (mode)
(Enables VCR functions)
TV (mode)
(Enables TV functions)
POWER
VCR/TV
(For TV or VCR mode)
COUNTER RESET
(Resets counter to zero) Video
TAPE POSITION/STATUS Input
(Locates tape position/tape status) Connector
DISPLAY
Audio Input
(Displays VCR status)
CHANNEL /
Connector
PLAY (Plays a tape)/
(L/R) TRACKING/ V-LOCK
FAST FORWARD/SEARCH
(Fast forwards tape/ forward
Multi Function Display
visual search)
REWIND/SEARCH (FRONT DISPLAY)
(Rewinds tape/ reverse visual
search)
STOP
(Stops tape)
Remote keys
PLAY, STOP, REW, and FF
Rear View of the VCR
function as
operation keys when menus
AC Power Plug
are displayed.
While plugged into an AC outlet, the VCR consumes 0.95 W
CHANNEL / of electrical power in off condition.
TRACKING/ V-LOCK
(Selects channel/ reduces
Audio Input Connector
picture noise during Play and
(L/R)
Slow mode)
SEARCH/ ENTER
(Set search system /
Video Input Connector
Tunes TV channel)
Press to eject tape. EJECT is not available during recording.
Video Output
Connector
Timer Indicator
Lights up when the VCR is set for a Timer
Recording, or when One Touch Recording Reset All VCR Memory Functions
(OTR) is used.
Flashes when a Timer Recording is set, but a Returns to factory setting. Use if relocating VCR, or if Initial Setup needs to be redone.
tape has not been inserted into the VCR.
• Make sure a tape is not inserted in the VCR.
VCR Indicator
Lights up when the VCR/TV
selector is set to VCR.
1 2
Hi-Fi Indicator
Lights up when Hi-Fi audio is present
in Playback Mode.
Note to CABLE system installer
This reminder is provided to call the CABLE system installer's attention to Article 820-40 of the NEC
in USA (and to the Canadian Electrical Code in Canada) that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
- 9 -
Reset Language, Channels, Clock, VCR's Output Channel
MENU Press ACTION*
SET UP VCR
SET UP CLOCK to display MENU.
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR'S OUTPUT CH: 3
SELECT : SET:
STOP/EJECT EXIT : ACTION
Language Channels Clock
1) Press to select
1) Press to select 1) Press to select
language item. "SET UP CHANNEL," "SET CLOCK," and
and press . press .
MENU
PLAY
SET UP VCR
SET UP CLOCK
MENU MENU
SET UP CHANNEL SET UP VCR SET UP VCR
IDIOMA/LANGUE : ENGLISH SET UP CLOCK SET UP CLOCK
VCR'S OUTPUT CH: 3
SET UP CHANNEL SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH IDIOMA/LANGUE : ENGLISH
VCR'S OUTPUT CH: 3 VCR'S OUTPUT CH: 3
SELECT : SET :
EXIT : ACTION
SELECT : SET:
SELECT : SET:
2) Press repeatedly EXIT : ACTION EXIT : ACTION
Remote RECORD REWIND/ FAST to change language 2) Press to select 2) Press to select
"ANTENNA," then "MANUAL," and press
Sensor SEARCH FORWARD/ item as shown below.
press to set . (For Auto Clock Set,
SEARCH
MENU
your antenna system select "AUTO CLOCK
SET UP VCR
SET UP CLOCK
("TV" or "CABLE.") SET.")
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR'S OUTPUT CH: 3
SET UP CHANNEL SET CLOCK
SELECT : SET : ANTENNA : CABLE
EXIT : ACTION AUTO SET AUTO CLOCK SET
WEAK S I GNAL D I SPLAY : OFF MANUAL
T I ME ZONE ADJUST : 0
For English
SELECT : SET : SELECT : SET :
MENU EXIT : ACT I ON EXIT : ACT I ON
PREPARAR VCR
FIJAR RELOJ
3) Press to select ("TIME ZONE ADJUST"
FIJAR CANAL
LANGUE/LANGUAGE:ESPAÑOL
"AUTO SET," then appears only when
SALIDA DE VCR CANAL : 3
press . auto clock is set.)
ELEGIR : FIJAR :
SALIR : ACTION • If you use Cable
SET CLOCK
Box, set it to the
For Spanish 11/21/2004 SUN 12:00PM -
PBS channel in your DST : ON
- - - - - - - - -- - - - - - - -- - - - - -
MENU time zone.
REGLAGE MAGNETOSCOPE
REGLAGE HORLOGE
REGLAGE CANAL SELECT : SET :
LANGUAGE/IDIOMA:FRANÇAIS END : ACT I ON
CA SORTIE : 3
3) Press and
CH AUTO SET PROCEEDING
SEL. : REGLER: to select and set
QUITTER : ACTION
VHF/UHF Antenna the date, time, and
For French
CANCEL : STOP DST (Daylight
Input Terminal
Saving Time).
3) Press ACTION to exit.
• After Channel Auto
Set is finished, Auto 4) Press ACTION to
Clock Set will be start the Clock and
AUDIO performed. exit this mode.
IN FROM ANT.
R
L VHF/UHF
OUT TO TV VHF/UHF Antenna
VIDEO
Output Terminal
IN 1 OUT VCR's Output Channel
Add or Delete a Channel
1) Press to select
Audio Output
To add channel:
"VCR'S OUTPUT CH."
Connector (L/R)
Select channel with NUMBER keys and
MENU
SET UP VCR press ADD/DLT.
SET UP CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR'S OUTPUT CH: 3
SELECT : SET:
EXIT : ACTION
2) Press .
To delete channel:
IF YOU PRESS ACTION
KEY, VCR ' S OUTPUT CH
Select channel with CH
SWITCHES TO CH 4.
keys and press ADD/DLT.
1
Turn VCR Power on.
3) Press ACTION.
2 Press and hold both PLAY and PLEASE TUNE YOUR TV TO
CH 4.
CHANNEL on the VCR for more than 5
seconds.
DST (Daylight Saving Time)
• The power shuts off.
After 3 seconds
VCR auto adjusts clock for DST.
3 Perform "Initial Setup (Ready to Play)" on Spring (First Sunday in April)
MENU
page 4. SET UP VCR DST:ON ➛ Sets clock ahead one hour.
SET UP CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH Autumn (Last Sunday in October)
VCR'S OUTPUT CH: 4
DST:ON ➛ Turns clock back one hour.
SELECT : SET: • If your area does not observe Daylight
EXIT : ACTION
Saving Time, select DST:OFF.
• To Make Corrections, • Keep these time changes in mind when
repeat steps 1) ~ 3). programming VCR for timer recordings.
*Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
- 10 - - 11 -
2004/02/06, 10:33
Limited Warranty
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT – LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material
Time Zone and workmanship and agrees to remedy any such defect for a period as stated
Adjust below from the date of original purchase.
(Only when Auto
VHS Video Cassette Recorder – One (1) year, parts and labour
Clock is set.)
LIMITATIONS AND EXCLUSIONS
1) Press to select
"SET CLOCK," and This warranty does not apply to products purchased outside Canada or to any
press . product which has been improperly installed, subjected to usage for which the
MENU product was not designed, misused or abused, damaged during shipping, or
SET UP VCR
SET UP CLOCK which has been altered or repaired in any way that affects the reliability or
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR'S OUTPUT CH: 3 detracts from the performance, nor does it cover any product which is used
commercially. Dry cell batteries are also excluded from coverage under this
SELECT : SET:
EXIT : ACTION
warranty.
2) Press to select
This warranty is extended to the original end user purchaser only.
"TIME ZONE
A purchase receipt or other proof of date of original purchase is required before
ADJUST,"
warranty service is performed.
SET CLOCK
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER
AUTO CLOCK SET
MANUAL
WARRANTIES, EXPRESS OR IMPLIED, EXCLUDING ANY IMPLIED
T I ME ZONE ADJUST : 0
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
SELECT : SET :
EXIT : ACT I ON
PURPOSE.
and press to
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY
subtract or add
hour(s) as necessary. SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES.
3) Press ACTION. In certain instances, some jurisdictions do not allow the exclusion or limitation of
• "TIME ZONE incidental or consequential damages, or the exclusion of implied warranties, so
ADJUST" returns to the above limitations and exclusions may not be applicable.
"0" if clock is set
manually.
WARRANTY SERVICE
For product operation and information assistance, please contact your Dealer or our
Customer Care Centre at:
Telephone #: Fax #: Web:
(905) 624-5505 (905) 238-2360 www.panasonic.ca
For product repairs, please contact one of the following:
• Your Dealer who will inform you of an authorized Servicentre nearest you.
• Our Customer Care Centre at (905) 624-5505 or www.panasonic.ca
• A Panasonic Factory Servicentre listed below:
Richmond, British Calgary, Alberta Mississauga, Ontario
Columbia
Panasonic Canada Inc. Panasonic Canada Inc.
Panasonic Canada Inc. 6835-8 th St. N. E. 5770 Ambler Dr.
12111 Riverside Way Calgary, AB T2E 7H7 Mississauga, ON L4W 2T3
CHANNEL 08 ADDED Richmond, BC V6W 1K8 Tel: (403) 295-3955 Tel: (905) 624-8447
Tel: (604) 278-4211 Fax: (403) 274-5493 Fax: (905) 238-2418
Fax: (604) 278-5627
Lachine, Québec
/ or NUMBER
Panasonic Canada Inc.
3075, rue Louis A. Amos
Lachine, QC H8T 1C4
CHANNEL 08 DELE TED
Tel: (514) 633-8684
Fax: (514) 633-8020
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original
carton. Include details of the defect claimed, and proof of date of original purchase.
- 12 -
Video Cassette Recorder
Operating Instructions
(Basic Operations)
For advanced operations, see the separate
"Advanced Operations" instruction book.
PV-V4524S-K
Model No.
Table of Contents
Important Safeguards and Precautions ........................... 2
Before Using ................................................................... 3
Connections and Initial Setup (Ready to Play) ................ 4
Playback / Record on a Tape .......................................... 5
Timer Recording ........................................................... 6, 7
Location of Controls ................................................... 9, 10
Reset All VCR Memory Functions ................................. 10
Reset Language, Channels, Clock,
VCR's Output Channel ................................................. 11
Limited Warranty ........................................................... 12
E S
As an NERGY TAR ® Participant, Panasonic has determined
that this product or product model meets the E NERGY S TAR ®
guidelines for energy efficiency.
Please read these instructions carefully before attempting to
connect, operate or adjust this product. Please save this manual.
LSQT0815 A
For assistance, please call : 1-800-561-5505 or visit us at www.panasonic.ca