Kenwood 106VR Instruction Manual page 20

For the connections and operations, also read carefully the
. instruction manuals of the video components. 4.
The 105VR model marketed in USA and Canada cannot
play or record video because it is not equipped with the
VIDEO input/output jacks.
- Keys or controis to be usec in tis operation
Turn the power of the monitor TV ON.
EQ select the VIDEO? or VIDEO2 input.
INPUT SELECTOR
(CC)
Fe} Play the video deck.
Recording of video source (VIDEO 2— VIDEO 1)
Connect the video source component to be
played.
EQ select the VIDEO 2 input.
INPUT SELECTOR
\
Fj Play the source component.
Start recording on the recording video deck.
The input sources are switched in the following order:
TUNER (frequency display)
PHONO
VIDEO1 {TAPE or MD}*!
CD
VIDEO2
mo & whe
"VIDEO1" or "VIDEO2" should be displayed.
if T Ter)
Yoeg ttt
eSelect the input to which a video deck is connected.
@*'. How to switch the display 42. =~ 16.
efor the operations of the monitor TV and video deck, refer to their
instruction manuals
e Connect the component to be played to the VIDEO 2 jacks.
@ The connectable components include a video deck (playback
only}, video camera (playback only), LD player or DBS tuner.
The input sources are switched in the following order:
TUNER (frequency display}
PHONO
VIDEO? (TAPE? or MD)
cD
VIDEQ2
OR wh
"VIDEO2" should be displayed.
29 Keener |
@ Start recording with the video deck which is connected to the VIDEO 1
jacks.