Kenwood 106VR Instruction Manual page 12

Keys o: controls to be used ir th:s operat or.
Turn the power ON.
Koz
DN /STANDBY
When the SPEAKERS indicator is ON:
coe ae : The speakers connected to the SPEAKERS terminals on the rear
SPEAKERS t f panel output sound.
When the SPEAKERS indicator is OFF:
SRs The speakers do not output sound. Use this setting when listening
30 SPEAKERS
;
through headphones.
The input sources are switched in the following order.
1 TUNER (frequency display) The selected source is
2 PHONO cisplayed
3 VIDEO1 (TAPE1 or MD)" !
INPUT SELECTOA 4 CD oT
*1: Switching the VIDEO1 display to TAPE1 or MD display
When a KENWOOD cassette deck or MD recorder is connected tn the
[SL16} system control mode, the VIDEO 1 input should be switched to
the TAPE1 or MD input with the following operation.
@Select VIDEO1 with the INPUT SELECTOR.
@Press and hold the AUTO key for more than 2 Note
seconds to select TAPE1 or MD.
Ve ray oe es ce ®
1 VIDEO1 ~ 2 TAPE1 - 3 MD
Play the selected source.
5 | Adjust the volume.
Volume level is displayed.
(4 \ e The time taken tl volume ievel is displayed is variable depending on the
current operating condition.
To decrease
Toincrease
=f eRotating the VOLUME
CONTROL at a higher speed increases the
volume DOWN up volume : amount of volume change (Al VOLUME function).
eThe sound of input source cannot be listened to while TAPE 2
MONITOR 's ON