Advertisement
EN-32
SELECT
Auto Timer
power is turned on again.
After step 6 (& p. 29) or step
12 (@ p: 31), press SET to
choose "ON"; and press MENU:
Or...
[2] Press SET to choose "ON".
To cancel the program...
[8] Press CANCEL.
™ Repeat steps 2 and 3 as necessary.
Digit keys
TV/CABLE/
VCR switch
CH. +/-
TV Brand Name And Code
TV BRAND NAME
JVC
MAGNAVOX
MITSUBISHI
PANASONIC
RCA
SHARP
SONY
TOSHIBA
ZENITH
HITACHI
BRAND CODE
Cable Box Brand Name And-Code
TOCOM
22,23
RCA
24,25,26
TV Multi-Brand Remote Control
If your TV is aJVC, you don't have to set the TV code.
PREPARATION
[i] Turn the TV's power OFF using the TV's remote control.
[2]. Set the remote control's TV/CABLE/VCR switch to "FV".
[3]. While holding down the POWER button, enter your TV's
brand'code-with the Digit Keys then press STOP.
Brand setting is completed. Once you set the brand, you do
not have to reset it until the remote's batteries are replaced.
If you'set the wrong code, re-enter the right code,
{4], Press POWER to tum the TV power on and check to see if
he,
the remote control works with the TV.
OPERATION
i
) 7] Set the remote control's TV/CABLE/VCR switch to "TV".
[2] Operate the TV.
@ POWER, TV/VIDEO, CH +/-, VOL. +/- buttons and Digit
keys are available.
[3] To operate VCR, set the TV/CABLE/VCR switch to "VCR".
4
L
Cable Box Multi-Brand Remote Control
ho
we
Some Cable Box brands have more than one code. When your
Cable Box does not function with a specified code, try other codes.
PREPARATION
[1 Turn the Cable Box power OFF using the Cable Box's remote
control.
[2] Set the remote control's TV/CABLE/VCR switch to "CABLE".
{3} While Holding down the POWER button, enter your Cable
Box's brand code with the Digit Keys then press STOP.
m= Brand setting is completed. Once you set the brand, you do
not have to reset it until the remote's batteries are replaced.
Wt If you set the wrong code, re-enter the right code.
(4) Press POWER to turn the Cable Box's power on and check to
see
if the remote control works, with the Cable Box.
OPERATION
(0 Set the remote control's TV/CABLE/VCR switch to "CABLE".
[2] Operate the Cable Box.
m POWER, CH +/-, ENTER buttons and Digit keys are
available.
[3] To operate VCR, set the TV/CABLE/VCR switch to "VCR".
NOTES:
l It is necessary to set the cable box brand in your remote control (this
page) and the Cable Box Controller (7p. 16) individually.
With the remote-control, you can change channels and turn on/off
your cable box from a distance.
With the Cable Box Controller, your cable box's channels can be
automatically changed during timer-recording.
EN-33
Advertisement
