Garmin Oregon Series Owner's Manual page 51

Navigating to a Destination Using the Compass
Calibrate the compass after moving large distances, experiencing
temperature changes, or changing the batteries.
To calibrate the electronic compass (Oregon 300, 400t,
400c, and 400i):
1. While outdoors, hold the Oregon level and do not stand near
objects that influence magnetic fields, such as cars, buildings,
or overhead power lines.
2. On the Main Menu, touch Setup> Heading> Press To Begin
Compass Calibration.
3. Touch Start and follow the on-screen directions.
Data fields
Bearing to
destination
Direction you
are currently
traveling
To open the Compass page:
On the Main Menu, touch Compass.
Hold the compass level when
navigating.
The bearing pointer points to
your destination, regardless of
the direction you are moving.
If the bearing pointer points
toward the top of the compass,
you are traveling directly toward
your destination. If it points any other direction, tum toward
that direction until the arrow is pointing toward the top of the
compass.
N45'54.892'
Wl19'09.901'
01'10"'0 To Point: 1331ml
Hat Rod State Parle
Information button
To navigate to a point using Where To?:
1. On the Main Menu, touch Where To?
2. Touch a category.
3. Touch the item to which you want to navigate.
4. Touch Go. A colored line indicates your course.
5. Touch > Compass.
6. Use the compass to navigate to your destination.
To navigate to a point on the map:
1. On the Main Menu, touch Map.
2. Touch the point on the map.
3. Touch the information button at the top of the
screen.
4. Touch Go > > Compass.
5. Use the compass to navigate to your
destination.
To stop navigating, touch Where To?
>
Stop Navigation.