Table of Contents
Advertisement
LED light (14): do not observe the LED radiation
directly with optical instruments.
CAUTION Do not stare at operating lamp.
Reducing dust exposure:
WARNING - Some dust created by power
sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
- Lead from lead-based paints,
- Crystalline silica from bricks and cement and
other masonry products, and
- Arsenic and chromium from chemically treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well-
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to filter out microscopic
particles.
This also applies to dust from other materials such
as some timber types (like oak or beech dust),
metals, asbestos. Other known diseases are e.g.
allergic reactions, respiratory diseases. Do not let
dust enter the body.
Observe the relevant guidelines and national
regulations for your material, staff, application and
place of application (e.g. occupational health and
safety regulations, disposal).
Collect the particles generated at the source, avoid
deposits in the surrounding area.
Use suitable accessories for special work. In this
way, fewer particles enter the environment in an
uncontrolled manner.
Use a suitable extraction unit.
Reduce dust exposure with the following measures:
- do not direct the escaping particles and the
exhaust air stream towards yourself or nearby
persons or towards dust deposits,
- use an extraction unit and/or air purifiers,
- ensure good ventilation of the workplace and keep
it clean using a vacuum cleaner. Sweeping or
blowing stirs up dust.
- Vacuum or wash protective clothing. Do not blow,
beat or brush protective gear.
Transport of li-ion battery packs:
The shipping of li-ion battery pack is subject to laws
related to the carriage of hazardous goods (UN
3480 and UN 3481). Inform yourself of the currently
valid specifications when shipping li-ion battery
packs. If necessary, consult your freight forwarder.
Certified packaging is available from Metabo.
Only send the battery pack if the housing is intact
and no fluid is leaking. Remove the battery pack
from the machine for sending. Prevent the contacts
from short-circuiting (e.g. by protecting them with
adhesive tape).
5. Figures
Illustrations are provided at the beginning of the
operating instructions.
Symbol explanation:
Movement direction
Drill bit
Slow
Fast
First gear
Second gear
Screws
Drilling, screwing
Thread tapping
Torque
Nm
6. Overview
Fig. A
1 Keyless chuck
2 Additional handle
3 Slide switch (drilling, threadtapping)
4 Gear switch
5 Rotation selector switch (rotation setting,
transport lock) - both sides of the machine
6 Handle
7 Bit depot *
8 Belt hook *
9 Battery pack release button
10 Capacity indicator button *
11 Capacity and signal indicator *
12 Battery pack *
13 Setting wheel (pulse function, torque control,
max. torque)
14 LED lamp (Working light and red warning lamp)
15 Trigger switch
*equipment-specific
7. Use
7.1
Electronic safety shutdown (...LTX BL...)
In case of sudden rotation of the power tool around
the drill axis, e.g. due to catching/jamming of the
accessory, the machine switches off automatically -
for better control of the machine and high user
protection compared to machines without this func-
tion.
The shutdown is indicated by a single red flashing of
the LED light (14) and a single beep.
7.2
Battery pack, capacity and signal
indicator
Charge the battery pack before use.
Recharge the battery pack if performance dimin-
ishes.
ENGLISH en
Fig. B
13
Advertisement
Table of Contents
