Operation - GRE Bottom Access Operating Instructions Manual

Components
Power and Control Unit
The power and control unit is
connected to the robotic
1
cleaner via the floating cable.
The unit is powered by AC
power (1) and supplies low
voltage and commands to the
cleaner unit through the outlet
socket (2).
The unit features a control
panel (3) with various controls
to operate the robotic cleaner.
Contents of Packing Box
The robotic cleaner is packed in a box containing:
- Robotic cleaner and floating cable
- Power and control unit
- User manual
According to the model purchased, the following accessories may be included
in the package:
- Remote Control
- Caddy
- Trolley
- Additional Accessories
3
2

Operation

Removing Brush Covers
The robotic cleaner is shipped with a protective cover over the scrubbing
brushes. Carefully remove the nylon covers from the scrubbing brushes.
CAUTION: Do not use a sharp tool to remove the cover as it could harm
the brushes.
Adjusting Floating Handle
On wall climbing models, set the floating handle:
1. Press the lock button (1 or 2 according to the model) to release the handle
lock.
2. Place the handle (3) diagonally at maximum position.
3. Repeat steps 1 and 2 on the other side of the cleaner unit.
Handle lock horizontal
Handle lock vertical
1 2 3
5