Specifications - Makita DUC101 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Overall length
(without guide bar and battery)
Rated voltage
Net weight
Standard guide bar length
Recommended guide bar length
Applicable saw chain type
(refer to the table below)
Sprocket
Chain speed
Chain oil tank volume
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
*1: Weight, without the saw chain, guide bar, guide bar cover, oil and battery cartridge(s).
*2: The lightest and heaviest combination of weight, according to EPTA-Procedure 01/2014. The weight may differ
depending on the attachment(s), including the battery cartridge(s).
Saw chain, guide bar, and sprocket combination
Saw chain type
Number of drive links
Guide bar
Sprocket
WARNING:
Do not change the guide bar to a different length one. Inappropriate guide bar length may
result in personal injury.
WARNING:
Use appropriate combination of the guide bar and saw chain. Otherwise personal injury may
result.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
*1
*2
Number of teeth
Pitch
Guide bar length
Cutting length
Pitch
Gauge
Type
Number of teeth
Pitch
DUC101
357 mm
1.6 - 2.0 kg
100 mm
100 mm
26
100 mm
111 mm
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH / DC18WC
8 ENGLISH
DUC150
408 mm
D.C. 18 V
1.1 kg
1.7 - 2.0 kg
150 mm
150 mm
80TXL
7
0.325"
8.0 m/s
(480 m/min)
3
55 cm
80TXL
32
150 mm
161 mm
0.325"
1.1 mm
Hard nose bar
7
0.325"