Specifications - Makita DUA301PT2 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Overall length (without guide bar and attachment)
Rated voltage
Net weight
Standard guide bar length
Recommended guide bar
length
Applicable saw chain type
(refer to the table below)
Standard sprocket
Chain speed
Chain oil tank volume
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
*1: Weight, with largest battery cartridge and empty oil tank, and without guide bar, chain, shoulder harness, and
attachment, according to EN ISO11680-1.
*2: The lightest and heaviest combination of weight, according to EPTA-Procedure 01/2014. The weight may differ
depending on the attachment(s), including the battery cartridge.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
Saw chain, guide bar, and sprocket combination
Saw chain type
Number of drive links
Guide bar
Sprocket
*1
*2
with 90PX
with 91PX
Number of teeth
Pitch
Guide bar length
Cutting length
Pitch
Gauge
Type
Number of teeth
Pitch
BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
11 ENGLISH
DUA301
2,530 - 3,760 mm
D.C. 36 V
7.8 kg
7.8 - 9.0 kg
300 mm
250 - 300 mm
250 - 300 mm
90PX
91PX
6
3/8"
0 - 20 m/s
(0 - 1,200 m/min)
3
160 cm
DC18SH / DC18WC
PDC01 / PDC1200
90PX
46
300 mm
296 mm
3/8"
1.1 mm
Sprocket nose bar
6
3/8"