Hyundai i30 N Owner's Manual page 378

CAUTION
Take the following precautions
to maintain optimal perform-
ance of the detecting sensor:
• Never disassemble the rear
corner radar or radar assem-
bly, or cause any damage to it.
• If the rear corner radar or near
the radar has been damaged
or impacted in any way, even
though the warning message
does not appear on the instru-
ment cluster, Blind-Spot
Collision-Avoidance
can may not operate properly.
We recommend that the vehi-
cle be inspected
HYUNDAI authorised repairer.
• If the rear corner radars have
been replaced or repaired, we
recommend that the vehicle
be inspect-ed by a HYUNDAI
authorised repairer.
• Use only genuine parts to
repair the rear bumper where
the rear corner radar is locat-
ed.
(Continued)
(Continued)
• Do not apply licence plate
frame or objects, such as a
bumper sticker, film or a
bumper guard near the rear
corner radar.
• Blind-Spot
Avoidance Assist may not
work properly if the bumper
have been replaced, or the
surroundings of the rear cor-
ner radar have been damaged
or paint has been applied.
• If a trailer, carrier, etc., is
Assist
installed, it may adversely
affect the performance of the
rear corner radar or Blind-
by a
Spot Collision-Avoidance
Assist may not operate.
• For more details on the pre-
cautions of the front view
camera, refer to "Forward
Collision-Avoidance
(FCA)" section in this chapter.
Blind-Spot Collision-
Avoidance Assist settings
Setting
Collision-
Blind-Spot Safety
With the engine on, select or dese-
lect 'Driver Assistance → Blind-Spot
Safety' from the Settings menu to set
whether to use each function.
- If 'Active Assist' is selected, Blind-
Spot Collision-Avoidance Assist will
warn the driver with a warning mes-
Assist
sage, an audible warning and brak-
ing assist will be applied depending
on the collision risk levels.
5
OTM070096N
5-109