Detecting sensor
[1] : Rear corner radar
Refer to the picture above for the
detailed location of the detecting
sensor.
Take the following precautions
to maintain optimal perform-
ance of the detecting sensor:
•
Never disassemble the rear
corner radar or radar assem-
bly, or cause any damage to.
•
If the rear corner radar or near
the radar has been damaged
or impacted in any way, even
OPDEN051579
though the warning message
does not appear on the clus-
ter,
Blind-Spot
Warning
properly. We recommend that
the vehicle be inspected by a
HYUNDAI authorised repairer.
•
If the rear corner radars have
been replaced or repaired, we
recommend that the vehicle
be inspect-ed by a HYUNDAI
authorised repairer.
•
Use only genuine parts to
repair the rear bumper where
the rear corner radar is locat-
ed.
CAUTION
Collision
may not operate
(Continued)
(Continued)
•
Do not apply license plate
frame or objects, such as a
bumper sticker, film or a
bumper guard near the rear
corner radar.
•
Blind-Spot Collision Warning
may not work properly if the
bumper have been replaced,
or the surroundings of the
rear corner radar has been
damaged or paint has been
applied.
•
If a trailer, carrier, etc., is
installed, it may adversely
affect the performance of the
rear corner radar or Blind-
Spot Collision Warning may
not operate.
5
5-97