Voice Synthesizer Unit - Kenwood TS-440S Instruction Manual

MODE Terminal connection
ecreteckenanon —eesener| uss | use | cw | rk | aw em | white ead | Blue teed
AUTO 2.2 kHz [6 kz
pS No sound from the speaker
No optional filter Mt 12 kHz WIDE WIDE
MZ 2.2 kHz
Ww 6 kHz
AUTO 2.1 kHz L_ 6 ktz
N No sound from the speaker
YK-888 Mi 2.1 kHz a, 12 kHz SSB ssB
M2 2.2 kHz {
W. 6 kHz
AUTO. 1.8 kHz Lb kHz
N No sound from the speaker
YK-88SN Mt 1.8 kHz Toute 12 kHz ssB SSB
M2 2.2 kHz |
Ww 6 kHz
. AUTO 2.2 kHz L 500 Hz L_6 kHz
N 500 Hz
YK-88C Mi No sound from the speaker 12 kHe cw WIDE
Mz KH
Ww 6 kHz
rte 2.2 kHe 270 Ha 6 kHz
YK-88CN Mi No sound from sneaker 12 kHz cw WIDE
M2 2.2 kHe
Ww 6 kHz
'AUTO 2.1 kHz 500 He 6 kHz
N 500 Hz
YK-888 and YK-88C M1 2.1 kHz 12 KHz cw 88B
M2 2.2 kHe
Ww 6 kHz
AUTO 2.7 kHe 270 He & kHz
N 270 Hz
Y&-888 and YK-88CN Mt 2.1 kHz 12 kHz cw ssB
m2 2.2 kHz
w 6 kHz
AUTO 1.8 kHz I 500 Hz 6 kHz
N 500 Hz
YK-88SN and YK-88C MI TB kHz 12 kHz cw ssB
mz 2.2 ke
Ww 6 kHz
AUTO 1.8 kHz I 270 He 8 kHz
N 270 Hz
YK-88SN and YK-88cn [Mt 1.8 kHz 12 kHz cw ssB
wz 2.2 kHz
Ww 6 kHz
AUTO 800 Hz 270 Hr 6 kHz
N 270 Hz
YK-88C and YK-88CN MI 500 Hz 12 kHz cw ssB
M2 2.2 kHz
Ww 6 kHz j
6-2. VOICE SYNTHESIZER UNIT VS-1
INSTALLATION
Remave the top cover from the radio.
. Remove the two screws on-the rear of the IF unt
and raise the unit to allow access to the PLL unit.
Install the VS-1 in the area at the left rear of the
PLL unit using the three screws provided with the
VS-1.
. Install the 3-pin plug on connector JO1 and the
8-pin plug on connector JO2.
No
28
2 a
ax
. Select the desired language that you want with
switch S-1 on the VS-1. ENG for English, or JA for
Japanese.
Install the 4-pin piug on connector @ 05 the IF
unit.
Reverse step 1.—2.
Turn on the power switch and press the VOICE
switch. The frequency will be announced. Adjust
VR-1 for the desired audio output level.