Advertisement
Available languages
Available languages
Quick Links
Operator's
Manual
CRAFTSMH
10-in. DRILL PRESS
1/2 HP MOTOR
Model 124.34983
CAUTION:
Before using this
product,
read this manual and
follow all its Safety Rules
and Operating
Instructions.
® Safety Instructions
® Assembly
® Operation
• Maintenance
• Troubleshooting
® Parts List
• Espa_ol
Sears Brands
Management
Corporation,
Hoffman
Estates,
IL 60179 U.S.A
Advertisement
Need help?
Do you have a question about the 124.34983 and is the answer not in the manual?
Questions and answers
I have lost the right-hand laser indicator and **** not sure what to do next. Help!
The manual does not specifically mention replacing the right-hand laser indicator for Craftsman part number 124.34983. However, it provides information on adjusting the laser beam alignment. To replace the right-hand laser indicator, follow these general steps:
1. Turn off and unplug the drill press to ensure safety.
2. Locate the existing laser assembly (part number 77-1).
3. Remove any securing bolts (part number 77-3) holding the laser assembly in place.
4. Detach the ferrule (part number 77-2) if necessary.
5. Install the new laser assembly, aligning it properly.
6. Secure it with the bolts (77-3).
7. Adjust the laser beam alignment using the adjustment knobs to ensure precision.
8. Plug in and test the laser to confirm proper operation.
If further details are needed, refer to the parts list and diagrams in the manual.
This answer is automatically generated