Page 1
GB: i n s t a l l a t i o n g u i d e FR: g u i d e d ' i n s t a l l a t i o n e t d ' u t i l i s a t i o n d u p r o d u i t IT: g u i d a p r o d o t t o e i n s t a l l a z i o n e...
Page 2
Fitting the iWs-10 CAUTION: The IWS-10 can only be fixed into plasterboard (dry-lined) walls with a thickness of up to 40mm (1 ”). Solid wall installation will require channeling out and frame work constructed to provide a structure for the Tri Grip ®...
Page 3
Fitting the iWs-10 loudspeakers draw around template and mark cut around marked line centre lines if necessary IWS-10 Template 280mm (11”) Template 90mm (3 9/16 ”) connect speaker cables by pushing guide speaker into cut out down on the terminals and clamping the bare wire in the through hole.