Table of Contents
Advertisement
Maintenance Assembly
Maintenance Assembly
AW 1.5 - 3.7kW Assembly Instructions
1.
With the pump casing upright, place the stator housing o-ring onto the upper cover and the discharge
gasket around the discharge.
2.
Take the upper casing and feed the stator cables through the gland hole.
3.
Place the upper casing onto the main casing (and the handle where present), then insert the set screws
and tighten. Be careful not to pinch the cable.
4.
Place the discharge gasket and discharge (i.e. hosetail) onto the upper casing and insert the set screws.
32
Advertisement
Table of Contents
