Table of Contents
Advertisement
In case of difficulty
Re
eT
Tuner
Radio stations cannot be received.
A station which was preset cannot be
received by pressing the correspond-
ing numeric key.
Interference,
Notes:
No antenna is connected.
The broadcast band is not set properly.
The frequency of the desired station is
not tuned.
The preset station belongs to a fre-
quency that cannot be received.
'The preset memory
was
cleared
be-
cause the power cord had been un-
plugged for a long period of time.
Noise due to ignition noise of an auto-
mobile.
Noise
due to an
influence
from
an
electric appliance.
Noise due to a nearby TV set.
Connect an antenna.
Set the broadcast band properly.
Tune the frequency of the desired sta-
tion,
Preset a station with a receivable fre-
quency.
Preset the station again.
Install the outdoor antenna apart from
the road.
Turn off the power of the appliance.
Install the system more apart from the
TV set.
1. This system is microprocessor-controlled, so malfunction may occur due to external noise or interference noise. In such a case,
unplug the power cord, plug it and turn power on again.
Connect the power cord again and turn the power on while pressing the TUNER key.
2. Do not use contact cleaners because it could cause a malfunction. Be specially careful against contact cleaners containing oil, for they
may deform the plastic components.
36 KR-V8040 (En)
Advertisement
Table of Contents
