Changing The Viewfinder - Nikon F2AS Photomic Instruction Manual

CHANGING THE VIEWFINDER
In addition to the F2AS Photomic finder included with
the camera, four other interchangeable viewfinders are
available. To remove the F2AS Photomic finder to mount
one of the other units, press the finder release lever
inward and rotate toward the front (this action releases
the mounting clamps); then, depress the finder release
button at the rear of the camera body and lift the finder
out of the camera.
To attach a viewfinder other than a Photomic-type model,
set it in position and press down firmly until it clicks
and locks into place on the camera.
To attach a Photomic-type model (including the F2AS
Photom ic finder included with the camera), first set the
aperture ring of the lens (if mounted) to the maximum
aperture setting; then, gently position the finder on the
camera and firmly press it down until it clicks and locks
into place (see Photo A). Once in place, turn the finder's ( )
shutter-speed selector left or right until it engages with A
the camera's shutter-speed dial and the two can be
turned in tandem (see Photo B) . Note that if the finder
is an AI-type model fitted with a meter coupling lever,
the lever should be released prior to mounting the finder
on the camera body (see "Coupling Lever Lock/Release
Operation" on page 39 for details).
40
(B)