Viewfinder Indications; Selecting A Print Type - Nikon Nuvis 200 Instruction Manual

Viewfinder indications

E
1Autofocus frame mark
Center this mark on the subject.
2 Red LED
Press the shutter release button lightly.
Then:
— If the LED lights up for a second,
focus operation has been completed.
— If it lights up continuously, the flash
is ready to fire.
— If it blinks, the flash is being charged
and the shutter is locked.
14
Available picture area
Areas cut off in the final print differ
depending on the print type (C/H/P).
C-type
(classic)
Aspect ratio = 2 : 3
H-type
(wide-vision)
Aspect ratio = 9 : 16
P-type
(panorama)
Aspect ratio = 1 : 3

Selecting a print type

Use the CHP selector to select your
desired print type before shooting.
•You can select any one of three print types
(C, H or P) by switching the CHP selector at
any time while film is loaded. (- P. 4)
Available picture area differs depending on
the print type selected.
•You can also change the type of print when
ordering extra prints at the photo lab.
CAUTION!
To prevent possible injury to your eye,
hold the camera away from your face
when you operate the CHP selector.