Changing The Lens - Nikon F2AS Photomic Instruction Manual

CHANGING THE LENS
To remove the lens from the camera body, press the lens
release button and, holding the button depressed, twist
the lens clockwise as far as it will go. With this action,
the lens will come loose and can be lifted out.
To mount a lens fitted with a meter coupling ridge, per-
form the following : Check that the finder 's meter cou-
pling lever is released (see "Coupling Lever Lock/ Release
Operation" on page 39 for details); position the lens in
the camera's lens mounting flange so that the mounting
indexes on the lens and camera body are aligned; and,
then, twist the lens counterclockwise until it clicks and
38
locks into place. These steps provide for full mounting of
the lens, while simultaneously indexing the lens' maxi-
mum aperture setting to the camera's Photomic finder .
To mount a lens not fitted with a meter coupling ridge, '
first lock the meter coupling lever in the up position
(again, see "Coupling Lever Lock/ Release Operation"
for details). Then mount the lens and lock it into posi-
tion as explained previously. For operation with lenses
not fitted with a meter coupling ridge, stop-down
measurement (as described on page 28) is required.