Sony TRINITRON KV-29C3A Service Manual page 11

Advanced Presetting
Joystick Joystick
Using the menu »Further Programme Preset« you can
If, due to the earth magnetism, the picture slants, you can use this function to
readjust the picture.
a) individually adjust and store the volume level of each channel (Volume offset).
b) in case of picture distortions use manual fine tuning to obtain a better picture 1 Press MENU ®.
quality. The factory setting is »on« for AFT (Automatic Fine Tuning). 2 Push joystick @ to blue or green to select the symbol E23 on the menu screen.
Push to yellow to confirm.
1 Press MENU ©. <1 ne i y ' bes :
P e a l yarn ee art 3 Push to blue or green to select »Installation«. Push to yellow to confirm.
2 Push joystick @ to blue or green to select the symbol fe] on the menu screen. = Further Prog. Preset 8 4 s y
Push to yellow to confirm. AV Preset 4 Push to blue or green to select »Picture Rotation«. Push to yellow to confirm.
Picture Rotation ' A ees
3 Push to blue or green to select »Installation«. Push to yellow to confirm. 2 Language/Country 5 Push to yellow. Push to blue or green to adjust the picture rotation. The adjusting © Rotation
\ Dema range is - 4 to + 4. Press the joystick ® to confirm.
4 Push to blue or green to select »Further Programme Preset«. Push to yellow to
confirm.
6 Press MENU @ to restore the normal TV picture.
5 Push to blue or green to select the programme position you want. Push to yellow
repeatedly to select:
a) VOL (Volume Offset) or b) AFT (Automatic Fine Tuning). The selected item
changes colour.
6a) VOL
Push to blue or green to adjust the volume for the selected programme position |
within a range of -7 to +7. Press the joystick @ to confirm. Repeat step 6 to set the |
volume level for other programme positions.
b) AFT
Push to blue or green to fine-tune the channel within a range of -15 to +15.
Press the joystick @ to confirm. Repeat step 6 to fine-tune other channels. |
7 Press MENU @ to restore the normal TV picture.
ocoucces
ae]
ng
Using this function you can preset the desired input source (e.g. £3 1, RGB signal) to
the respective AV input (AV1). In this way a connected VCR switches automatically
to the RGB signal. Also you can label the input sources.
Press MENU ®.
Push joystick @ to blue or green to select the symbol £4 on the menu screen. ia
Push to yellow to confirm.
CARRS ET nT ae
AV-INPUT SOURCE LABEL
AV
AV
"RGB H Centre i
RGB _H Size
3 Push to blue or green to select »Installation«. Push to yellow. Push to blue or
green to select »AV Preset«. Push to yellow to confirm.
Push to blue or green to select the desired AV input. Push to yellow to confirm.
5 Push to blue or green to select the desired source. Push to yellow to confirm.
For the respective AV inputs you have the following choice:
AV1: RGB or AV
AV2: YC2 or AV
AV3: YC3 or AV
6 To label a source: Push to blue or green to select the first character (letter or
number, »-« for a blank). Push to yellow to confirm. Select the other four
characters in the same way.
7 Press the joystick @ to store.
Repeat steps 4 to 7 for the other AV inputs.
9 For RGB input source only: Push to blue or green to select RGB H Centre.
¢ Push to yellow to confirm.
* Push to blue or green to adjust the centre of the picture in a range of -5 to +5.
Press the joystick @ to store.
° Repeat step 9 to adjust RGB H Size.
10 Press MENU © to restore the normal TV picture.