Other Functions - Nagano Keiki GC31 Instruction Manual

Digital pressure gauge
Table of Contents

Advertisement

13. Other functions

 Basic key operations
In all setting modes, values are set with the
to decrease the value. A repeat state occurs in three phases of speed when the
are pressed for more than 0.5 seconds to increase or decrease numerical value.
are also used for setting comparator, unit and filter in the function setting mode.
 Zero point adjustment mode
In measurement mode, press the
blinks) after releasing pressure from the pressure port. Approximately 1 second later an
automatic zero adjustment takes place and the pressure is displayed as zero. When the zero
adjustment is successful,
when applied pressure is outside the range of -10~10% F.S.. At this time, zero adjustment
does not happen.
 Peak hold display mode
This device keeps the maximum and minimum pressure level applied to the pressure port as
peak and bottom values respectively, in the internal memory. The peak and bottom values are
displayed as long as
message
is displayed for one second and the peak value which is corresponded to
each operation is displayed.
Peak and bottom values are reset when power is restored, or by the following procedure:
Resetting peak value: While holding the
Resetting bottom value: While holding the
 Key lock
Key operations can be nullified to prevent inadvertent overwriting of setting values. Once the
key lock state is set, the mode cannot be shifted to the one other than the peak hold display
mode. The key lock mode cannot be reset by restoring power. It is reset by the following
unlocking procedure.
Press the
MODE
+
for one second, indicating that the unit has entered into the key lock state. To reset, press the
+
keys again. The message
MODE
the unit is unlocked.
MODE
is displayed. The error
or
keys are held down. When you perform this operation, the
keys in the measurement mode. The message
▲ ▼
keys. Use
keys for more than 3 seconds (until "---" display
key, press the
key .
key, press the
is displayed for one second indicating that
TY-GC31-004A
key to increase and
▲ ▼
▲ ▼
is displayed for one second
key .
is displayed
22/24
key
keys
keys
Rev.B

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gc31-124Gc31-164Gc31-174Gc31-324Gc31-364Gc31-374

Table of Contents