Seat Ventilation; Control Locks; Excavator Arm Quickhitch; Radio Mute - jcb JS300 Operator's Manual

Seat Ventilation

Control Locks

Excavator Arm Quickhitch

Radio Mute

Engine Stop Switch

Manual Regeneration

Slew Lock

19
Two position rocker switch. The switch functions operate when the ignition is in the
on position.
Position : 1 = Seat ventilation off
Position : 2 = Seat ventilation on
Controls isolation switch. Two position momentary rocker switch. The switch functions
when the engine is running, and the controls isolation lever is lowered. Press
momentarily to isolate the controls, the switch light illuminates. Press momentarily
again to enable the controls, the switch light extinguishes.
Position : 1 = Rest position. Switch light illuminates when the controls are isolated
Position : 2 = Momentary position.
Three position momentary rocker switch. The switch functions operate when the
ignition switch is in the on position and the controls are active.
Position : 1 = Quickhitch deactivate (lock).
Position : 2 = Off.
Position : 3 = Quickhitch activate (unlock).
Two position rocker switch. The switch functions operate when the ignition switch is
in the on position.
Position : 1 = Radio is on
Position : 2 = Radio is muted.
Two position rocker switch. The switch functions operate when the ignition switch is
in the on position.
Position : 1 = Engine run
Position : 2 = Engine stop. Engine cannot be cranked.
Two position momentary rocker switch. The switch functions operate when the engine
is running. Press and hold the switch for 3-6 seconds to initiate a manual regeneration.
Position : 1 = Rest position, switch light illuminates when manual regeneration is
active.
Position : 2 = Momentary position.
Two position rocker switch. The switch functions operate when the ignition switch is
in the on position.
Position : 1 = Slew available.
Position : 2 = Slew locked.
9831/1100-6
About the Product
Console Switches
19