Vantrue Element 2 User Manual page 13

Note: There are two protective films numbered 1 and 2. Please remove
the protective film from No. 1, paste the electrostatic sticker on the
windshield, and then remove the protective film from No.2. Remove
N E N N E N E E
the 3M tape from the mount, then fix the mount and camera on the
electrostatics stickers.
3. Installation of car charger: Connect one end of the car charger to the
car cigarette lighter and the other end to the Type C port on the front
camera GPS mount. When the green light of car charger is on, it
means it is powered on.
- 9 -