The Dsp Section - Crate VTX30 User Manual

The DSP Section:

Use the DSP control to select one of the 16 built-in
digital effects. Use the DSP Level control to adjust
the amount of selected effect. In the fully counter
clockwise position there will be no effect applied. As
you rotate the Level control clockwise the amount of
effect increases.
The chart below describes each of the 16 positions of
the selector, starting at the 12:00 position and work-
ing clockwise.
FLANGER 1:
FLANGER 2:
CHORUS 1:
CHORUS 2:
ROTARY:
OCTAVE:
DOUBLER:
REVERB:
6
VTX30
Two-Channel Guitar Amplifier with DSP
slow deep flange w/reverb
flange w/reverb & delay
slow tremolo chorus w/reverb
chorus w/reverb & delay
rotating speaker effect
adds signal one octave below
T-WAH: touch wah effect
I-WAH: inverse wah effect
adds second signal slightly out of sync
small room reverb
medium room reverb
large room reverb
concert hall reverb
DELAY: short slapback w/small room reverb
medium delay w/large room reverb
slow deep flange w/reverb
DSP
DELAY DELAY
LEVEL
FLANGER 1 FLANGER 1
FLANGER 2 FLANGER 2
CHORUS 1 CHORUS 1
CHORUS 2 CHORUS 2
ROTARY ROTARY
OCTAVE OCTAVE
T-WAH T-WAH
I-WAH I-WAH
DOUBLER DOUBLER
REVERB REVERB