Table of Contents
Advertisement
Operating mode
Dough proving
ê
Oven cleaning
z
Interior lighting
\
* Turn the temperature selector beyond 275 °C.
in the temperature display
Current temperature
Press the
info button. The current temperature appears for
±
3 seconds.
Note: The current temperature can only be displayed with
operating modes with a default temperature.
Heating indicator
The heating indicator displays the rising temperature in the
cooking compartment.
Temperature reached (figure A)
■
Appliance reheating (figure B)
■
$
Switching off the appliance
Turn the operating mode selector to the
appliance is switched off.
The appliance has a cooling fan. After the appliance is switched
off, the cooling fan may continue to run.
You can see in the temperature display whether there is high or
low residual heat in the cooking compartment.
Temperature
Meaning
display
Residual heat high (above 120 °C)
•
Residual heat low (between
œ
60 °C and 120 °C)
Electronic clock
In this section, you can read about
how to set the timer
■
how to switch your appliance off automatically (cooking time
■
and end of operation)
how to switch your appliance on and off automatically (preset
■
operation)
how to set the time
■
find out how to activate rapid heat up
■
Default
Temperature
temperature in
range in °C
°C
Fixed setting
Fixed setting
Fixed setting
‚Ÿ£
appears
%
position. The
Û
Changing the basic settings
Your appliance has various basic settings, which are preset at
the factory. You can, however, change these basic settings as
required.
The appliance must be switched off and controls must not be
locked.
Press and hold the
±
info button for 3 seconds to go to
1.
the basic settings menu.
In the temperature display,
Press the
±
info button briefly and repeatedly until the setting
2.
symbol for the current basic setting of a submenu is
displayed in the temperature display (e.g.
Using the temperature selector, set the required basic setting
3.
within a submenu (e.g.
™„„
Press and hold the
info button for 3 seconds.
±
4.
Your basic setting is saved.
You can change the following basic settings:
Basic settings menu
Submenu
Basic setting
Childproof lock
Appliance controls
unlocked
Appliance controls locked
Appliance controls
permanent lock
Audible signal
Audible signal off
Audible signal 30 seconds
Audible signal 2 minutes
Audible signal 10 minutes
Automatic safety cut-out
The automatic safety cut-out is activated if your appliance is
switched on and you have not made any settings for a long
time.
The length of time after which your appliance switches itself off
depends on the settings that you make.
flashes in the temperature display. Appliance operation is
‹‹‹
interrupted.
Turn the operating mode selector to the
deactivate it.
Clock display
&ORFN IXQFWLRQ EXWWRQ
appears.
™‚‹
).
™„ƒ
).
Setting
symbol
™‚‹
™‚‚
™ƒ‚
™‚‹
™„‚
™„ƒ
™„„
position to
Û
5RWDU\ VHOHFWRU
7
Advertisement
Table of Contents
