Table of Contents
Advertisement
Preset operation
The appliance switches on automatically, then switches off
automatically at the time preselected for the end of operation.
To set this function, combine the cooking time and end of
operation clock functions.
Bear in mind that food which spoils easily should not be left in
the cooking compartment for too long.
Set the operating mode and temperature.
1.
The appliance heats up.
Press the
KJ
clock function button repeatedly until
2.
the
and
symbols light up.
KJ
x
Set the cooking time with the rotary selector
3.
(e.g.
‚
:
„‹
hours).
The setting is applied automatically.
Press the
KJ
clock function button repeatedly until
4.
the
KJ
and
y
symbols light up.
Set the end of operation using the rotary selector
5.
(e.g.
‚ƒ
:
„‹
o'clock).
The appliance switches off and waits until the appropriate
time to switch on (
:
‚‚
‹‹
switches off automatically at the time set for the end of
operation (
‚ƒ
:
„‹
).
Turn the operating mode and temperature selector back to
6.
the
position.
Û
Press the
KJ
clock function button to exit the clock function.
7.
Setting the clock
You can only change the clock when no other clock function is
active.
Press the
clock function button repeatedly until
KJ
1.
the
and
symbols light up.
KJ
3
Set the clock using the rotary selector.
2.
The setting is applied automatically.
Childproof lock
In this section, you can read about
how to lock your appliance
■
how to lock your appliance permanently
■
Lock
Once it has been locked, the appliance cannot be switched on
accidentally or by unauthorised users (e.g. by children playing).
To switch the appliance on again, you must unlock it. After
appliance operation, the appliance is not automatically locked.
Lock it again if necessary or activate the permanent lock.
in the example). The appliance
Rapid heat up
You can reduce the heating up time for the
and
ë
Bread-baking operating modes if the set temperature is
higher than 100 °C.
Note: During Rapid heat up, do not place any food in the
cooking compartment for as long as the
Set the operating mode and temperature.
1.
The appliance heats up.
Press the
clock function button until the
KJ
2.
symbols light up and
Œ
Turn the rotary selector clockwise.
3.
is displayed in the clock display and the
Ž
up. Rapid heat up is activated.
After reaching the set temperature, Rapid heat up switches off.
The
f
symbol goes out.
Checking, correcting or deleting settings
To check your settings, press the
1.
repeatedly until the corresponding symbol lights up.
If necessary, you can correct your setting using the rotary
2.
selector.
If you wish to cancel your setting, turn the rotary selector anti-
3.
clockwise to the original value.
Lock appliance
Switch off the appliance.
1.
Press and hold the
info button until
±
2.
temperature display.
Turn the temperature selector until
3.
temperature display.
Press and hold the
info button until the
±
4.
in the temperature display.
Note: If you try to switch the appliance on when it is locked, -
appears in the temperature display.
3
CircoTherm®
symbol is lit.
f
and
KJ
appears in the clock display.
symbol lights
f
clock function button
KJ
appears in the
™‚‹
™‚‚
appears on the
symbol appears
‚
f
†
-
9
Advertisement
Table of Contents
