Table of Contents
Advertisement
Operating Your Wireless Router
Step 9
Step 10
Accessing the Configuration Utility
To access the configuration utility, complete the following steps:
Step 1
Figure 14
Step 2
Step 3
Step 4
Figure 15
Step 5
16
Click OK.
Restart your computer.
Connect your computer to the port marked Management on the SmartPoint or
RoutePoint wireless router using an IEEE 802.3 RJ-45 crossover cable, as shown in
Figure 14.
SmartPoint and RoutePoint Wireless Router Management Connection
Start a web browser (Explorer or Netscape) on your PC.
In the URL window of the browser, enter the management IP address of the SmartPoint
or RoutePoint wireless router:
https://192.168.167.166
When the Enter Network Password dialog box appears, enter the username admin and
password fhp, as shown in Figure 15, then click OK.
Enter Network Password Dialog Box
Once properly logged in, the FHP Wireless Configuration Center screen opens, as shown
in Figure 16.
Management port
fhp_010
Advertisement
Table of Contents
