Table of Contents
Advertisement
Troubleshooting
Checkpoints
If you encounter a problem with the dryer, first check the table below and try the suggestions.
Problem
Dryer does not start.
The dryer does not warm
up.
Items are not dried.
The dryer is too loud.
Items are not dried evenly.
52
English
Untitled-14 52
• Make sure the dryer is plugged in.
• Make sure the door is properly closed.
• Check the fuse or reset the circuit breaker.
• If you opened the door during a cycle, tap and hold
• Clean the filter.
• Make sure Child Lock is not activated.
• Check the fuse or reset the circuit breaker.
• Check the lint filter and the heat exchanger. Clean them if necessary.
• The dryer may be in the cooling down process of the cycle.
Check all of the above. Additionally:
• Do not overload the dryer. If the dryer is overloaded, it could take longer
for items to dry.
• Dry heavy fabrics separately from light fabrics.
• The item(s) are too small and may not getting enough spinning inside
the drum.
• Clean the filter.
• Clean the heat exchanger.
• If the "Clean heat exchanger & tap
optional filter & tap
" message appears on the display, refer to the
"Heat exchanger" section on page 48 and clean the heat exchanger.
• If a drain hose is connected, make sure water is draining properly.
• Look for coins, loose buttons, nails, and other objects and remove them
immediately.
• Check the lint filter. Remove any items stuck inside the lint filter.
• Make sure the dryer is level and standing firmly on the floor.
• The dryer may hum due to air moving through the drum and fan. This is
normal.
• Seams, pockets, and other parts of clothing are harder to dry than
others. This is normal.
• Sort heavy and light items separately.
Action
again.
" or "Clean heat exchanger
2023-07-18
5:16:46
Advertisement
Table of Contents
