Electrolux EEM28200L User Manual page 16

3. Close the appliance door to start the
programme.
9.3 How to select and start the
programme Pre-rinse
1. To select Pre-rinse, press and hold
for 3 seconds.
The light related to the button flashes.
2. Close the appliance door to start the
programme.
9.4 How to activate ExtraPower
1. Select a programme using MY TIME
selection bar.
2. Press .
The light related to the button is on.
ExtraPower is not a permanent option
and must be activated every time before
you start a programme.
It is not possible to activate or deactivate
ExtraPower while a programme is
running.
Activating ExtraPower increases the
water and energy consumption as well as
the programme duration.
9.5 How to start the AUTO Sense
program
1. Press .
The light related to the button is on.
2. Close the appliance door to start the
program.
The appliance senses the type of load and
adjusts a suitable wash cycle and its duration.
9.6 How to delay the start of a
programme
You can delay the start of the selected
programme by 3 hours.
1. Select a programme.
2. Press .
16 ENGLISH
The light related to the button is on.
3. Close the appliance door to start the
countdown.
During the countdown, it is not possible to
change the programme selection.
When the countdown is complete, the
programme starts.
9.7 How to cancel the delay start
while the countdown operates
Press and hold for about 3 seconds.
The appliance returns to the programme
selection.
If you cancel the delay start, you have to
select the programme again.
9.8 How to cancel a running
programme
Press and hold for about 3 seconds.
The appliance returns to the programme
selection.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
9.9 Opening the door while the
appliance operates
Opening the door while a programme is
running stops the appliance. It may affect the
energy consumption and the programme
duration. After closing the door, the appliance
continues from the point of interruption.
If the door is opened for more than 30
seconds during the drying phase, the
running programme ends. It does not
happen if the door is opened by AirDry
function.
9.10 The Auto Off function
This function saves energy by switching the
appliance off when it is not operating.