Safety - Husqvarna 525iHE3 Operator's Manual

yyyywwxxxx
Note:
Other symbols/decals on the product refer to
special certification requirements for some markets.
Symbols on the battery and/or on the
battery charger
Fail-safe transformer.
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
4
There is no electrical insulation in this product. If the product touches or comes
near high voltage power lines, it can cause serious injury or death to the opera-
tor. Electricity can move between different objects by a curve. The highter the
voltage, the longer the electricity can move. Electricity can also move through
branches and other objects, especially if the object is wet. Always keep a dis-
tance at a minimum of 10 m/33 ft between the product and high voltage power
lines and/or objects that touches the power lines. If it is necessary to do work
near the power lines, make sure that the power is off before you start the work.
Keep a distance at a minimum of 15 m/50 ft to other persons or animals during
the operation.
The rating plate shows serial number. yyyy is the production year and ww is the
production week.
Recycle this product at a recy-
cling station for electrical and
electronic equipment. (Applies
to Europe only)
Used if there is a risk of
Used if there is a risk of
Use and keep the battery charger indoors
only.
Double insulation.

Safety

General power tool safety warnings
WARNING:
and all instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
Note:
Save all warnings and instructions for future
reference. The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
Work area safety
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Read all safety warnings
2130 - 002 - 24.11.2023