Advertisement
Note; The video monitor audio connectors are included in the installation diagrams for use in connecting
a computer that has audio capabilities.
To connect one video monitor to your computer, feed the video signal from the computer to the VIDEO-IN
connector. The termination switch on the back panel should be set to 750. (Maximum video cable length is 150
meters.)
With
an
HP82912A Video Monitor:
With an HP82913A Video Monitor:
AUDIO SIGNAL
AUDIO SIGNAL
For more than one display, the termination switch should be set to HIGH on all video monitors except the last
one. The switch on this last monitor should be set to 75ft. Up to four displays can be connected.
With an HP 82912A Video Monitor:
AUDIO SIGNAL
6
HIGH
AUDIO
VIDEO
©
out
©
With an HP 82913A Video Monitor:
AUDIO SIGNAL
3
Advertisement
