Travel Lock; Using The Beard Styler Attachment Without Comb - Philips NORELCO SP9883 Manual

20
English

Using the beard styler attachment without comb

Travel lock

5 Move the shaver upwards while you exert
gentle pressure. Make sure the front of the
comb is in full contact with the skin.
6 Clean the attachment after use.
You can use the beard styler attachment without
the comb to contour your beard, moustache,
sideburns or neckline at a length of 0.5 mm
(1/32 in).
Note: The beard styler is only intended for
trimming facial hair. Do not use it on areas below
the neck.
1 Pull the comb off the beard styler attachment.
Note: Grab the comb in the center to pull it off
the beard styler attachment. Do not pull at the
sides of the comb.
2 Switch on the appliance.
3 Hold the beard styler attachment
perpendicular to the skin and move the
appliance downwards while you exert gentle
pressure.
4 Clean the attachment after use.
You can lock the shaver when you are going to
travel to prevent it from switching on
accidentally.