Table of Contents
Advertisement
SERIAL NUMBER PLATE
FUEL SYSTEM
'The fuel screens
in the strainer,
the carburetor
injector
screenand fuelnozzies willrequirecleaningat thefirst 25 hour
inspection and every 50 hour inspection thereafter. The screen
in the carburetor
and injector is located in the housing where
the fuel inlet line connects
to the injector.
The fuel strainer
located under the floorboards are accessible for cleaning through
an access plate on the bottom of the fuselage.
When reassem-
bling the strainer after cleaning,
a small
amount
of grease
applied to the gasket will facilitate assembly.
Acetone is re-
commended for cleaning these screens.
Advertisement
Table of Contents
