Hardware Installation Procedure - Raidon InTANK iR2822 User Manual

Hide thumbs Also See for InTANK iR2822:

Table of Contents

iR2822 User Manual

4. IR2822 product allows user to simultaneously use the two different hard drives from two different

manufactures.

However, if the user expects a better eﬃciency, we strongly recommend the user to use the two

hard drives from the same manufacturer.

5. Please make sure that the two hard drives are free from bad blocks or defects prior to installation

in order to avoid system crashes or data loss.

6. The actual storage capacity of iR202 recognized by the system may differ from the total capacity

stated on the hard drives combined once the drives have been formatted.

7. It is highly recommended for user to back up important data contained within the IR2822 unit on

a regular basis or whenever the user feels necessary to a remote or a separate storage device.

RAIDON will not be responsible for any lost of data caused during the use of the unit or the

recovery of the data lost.

Note:

Once the drive mode configuration has been completed, re-configuration using the same

hard drives to set the drive mode will result in complete data loss. If you must change

the drive mode, make sure to backup all data prior to the mode change.

4. Hardware Installation Procedure

Please follow the instructions below to complete the hardware installation.

Step 1

Open the package, take out the product, and make sure that all the enclosed contents are

not damaged or missing. Should you find damages or missing contents, please contact to

your supplier immediately.

Step 2

Put the system on a stable surface, ensure that it is well ventilated without blockage of the

air ﬂow, and keep it away from the wet and any area which may easily get damaged.

Step 3

Use the key included in the Accessory Kit, insert it into the Key Access Opening to eject the

removable drive tray latch, and extract the Removable Drive Tray.

Mount your hard drives onto the Removable Drive Tray, secure it with the screws included

Step 4

in the Accessory Kit to avoid any damage to the hard drive due to accidental movements.

Lock

Unlock

Press

Table of Contents