Table of Contents
Advertisement
NLChild lock
Empty the condensed water container
When the drying program has ended
or if the display shows an indication
during use, empty the condensed
water container.
Requirements
¡After drying, the display shows:
"End"
¡whether the display shows during
use: .
Pull out the condensed water
1.
container horizontally.
Empty the condensed water container.
2.
Regularly check the filter of the
condensed water container
→ Page 49 and clean a dirty filter.
Make sure that the condensed water
reservoir before using it
device enters
→
"condensation water re
slide", page 3
38
shifted.
server in it
8
Slide in the condensed water
container
Push the condensed water
▶
container in as far as it will go.
1 3 Child lock
B
esecure your device against unauthorized
wish to operate via the controls.
13.1 Enabling Child Lock
▶
Approx. 3 s up
aappears on the display
to give.
aThe controls are
blocked.
aThe child lock also remains in standby
of the device and active in the event of a
power failure.
13.2 Deactivate child lock
Required:To deactivate the child lock,
the appliance must be switched on.
▶
Approx. 3 s up
agoes out in the display
to press.
3 seconds
displayed
to press.
3 seconds
.
Advertisement
Table of Contents
