Safety Measures - Vitek VT-1549 Manual Instruction

ENGLISH
COFFEE GRINDER VT-1549
The unit is intended for grinding cof-
fee beans only.
DESCRIPTION
1. Body
2. Process chamber
3. Lid
4. ON button
5. Cord storage
ATTENTION!
For additional protection it is rea-
sonable to install a residual current
device (RCD) with nominal opera-
tion current not exceeding 30 mA.
To install an RCD contact a spe-
cialist.

SAFETY MEASURES

Read this instruction manual care-
fully before using the unit and
keep it for the whole unit operation
period.
Use the unit for its intended purpose
only, as specified in this manual.
Mishandling the unit can lead to its
breakage and cause harm to the user
or damage to his/her property.
•
Before connecting the unit to the
mains, make sure that the volt-
age specified on the unit cor-
responds to your home mains
voltage.
•
Place the unit on a flat moisture-
resistant surface away from heat
sources and open flame.
•
Make sure that the power cord
does not contact with hot sur-
faces and
edges.
•
Do not use the unit outdoors.
•
Do not leave the operating unit
unattended.
•
Always unplug the unit if you are
not using it.
•
Do not touch the knives cutting
edges; they are very sharp and
dangerous!
•
If the knives stop rotating sud-
denly, unplug the unit first and
only after that remove the ingre-
dients that block knives rotation.
•
Do not overload the process
chamber with food products.
•
Continuous operation time of
1 operation cycle should not
exceed 45 seconds. Make a
3-5 minute break between
operation cycles.
•
Do not switch the unit on with-
out food.
•
Remove the lid and remove the
ground coffee only after com-
plete stop of knives rotation.
•
When disconnecting the power
plug from the mains, do not pull
the cord, but hold the plug with
your hand.
•
Do not touch the coffee grinder
body and the power plug with
wet hands.
•
Do not use the unit near a kitchen
sink, do not expose the unit to
moisture.
•
To avoid electric shock, do not
immerse the power cord, the
power plug or the coffee grind-
8
sharp furniture