Tecto Fl2 Aida; Cabinet Types - Viessmann Tecto FL2 Aida User Manual

2. Tecto FL2 Aida

Tecto FL2 Aida is a vertical, refrigerated cabinet available as both stand-alone (plug-in) as well as remote variants.
Plug-in variants of the cabinet contain all the machinery and refrigerant necessary for operating the cabinet. The
equipment feeding refrigerant to remote variants of the cabinet is housed in a separate, remote room. Remote
cabinets are connected to a central refrigerant line running from the room to the cabinets.
Tecto FL2 Aida cabinets can be installed individually or in parallel. Each cabinet is individually temperature
controlled and comes pre-set to the correct temperature, as specified during product order.
Heat loss is minimised by a steady vertical airflow in front of the shelves. Maintaining a tight seal on the glass doors
and a steady airflow is crucial for the proper operation of the cabinet.

2.1. Cabinet types

Both the remote as well as plug-in variants of Tecto FL2 Aida are available in several different versions.
Plug-in cabinets

A version is the ambient format of the cabinet.

H version is a heated display cabinet. It is equipped with heating resistors installed inside tabletop
bases. The heat output is controlled by a thermostat that can be set to the desired temperature.

SFO version is an open front rear loader model.

SOSF is a serve-over cabinet which can be used for self-service as well.
Plug-in cabinets and remote cabinets

SF version is a self-service model.

BO version is a pastry cabinet that
non-refrigerated produce.

SO version is a serve-over cabinet
combines a refrigerated display space with ambient (top) display for
EN DE ES FR PL RU NL FI SV NO DA EE LT LV
6