765 X 395 671 X 392 LEFT SIDE PANEL 671 X 392 RIGHT SIDE PANEL DRAWER SLIDE 300 X 25 765 X 395 BASE 200 X 115 BACK PANEL 690 X 370 H PROFILE 668X 28 335 X 115 RIGHT DRAWER SIDE 335 X 115 LEFT DRAWER SIDE DRAWER FRONT...
Page 7
Step 4 Ensure the drawer runner side with 2 holes for dowels part 04 is facing towards the top of the panel. TOP OF PANEL TOP OF PANEL 28mm Ø4,5 GOLD Step 5 Build your furniture on a soft clean cover to stop the components getting marked during assembly.
Page 8
Step 6 BACK 40mm Ø4,0 GOLD Ensure the drawer runner side with 2 holes for dowels Step 7 part 04 is facing towards the top of the panel. TOP OF PANEL 28mm Ø4,5 GOLD Step 8 8 x 8...
Step 11 28mm Ø4,5 GOLD Step 12 30mm 14mm 14mm Ø3,5 Ø3,5 Ø3,5 16mm P3 P3 GOLD BLACK BLACK BLACK Ø3,0 Fixing drawer safety stops Step 13 1; Insert drawers into frame by approximately 50mm. 2; Push wooden dowels in through the pre-drilled holes close to the back of the drawer sides until they are level with the...
Page 11
Step 14 WARNING: CHECK FOR HIDDEN PIPES AND CABLES BEFORE DRILLING. IMPORTANT: IF YOUR WALLS ARE NOT SOLID LIKE BRICK OR STONE, YOU WILL REQUIRE SPECIALIST FITTINGS (NOT SUPPLIE - Place fixing strip against the wall and mark position for drilling hole. - Drill hole in your wall to a depth of 30mm using a 6mm drill bit.