Century EB-4 Owner's Manual page 60

Section IVA - OPERATING INSTRUCTIONS
4A.10 TOW BALL (OPTIONAL) (cont'd)
(d) Fully retract wheel lift boom to prevent crossbar from pivoting,
then raise wheel lift to desired height for towing.
(e) Attach safety chains.
THE PURPOSE OF USING THE WHEEL LIFT FOR TOW BALL
APPLICATION IS FOR ITS EASE OF OPERATION USING A
4A.13 OUTER CROSSTUBE REMOVAL
(a) Fully extend outer crosstubes, then push back on approximately
1/2".
(b) Using a screwdriver or 1/4" rod, insert into crosstube removal
hole located beside "T" handle. See Figure 4A.26.
WHEEL LIFT (cont'd)
FIGURE 4A.25
MINIMUM OF MANUAL ALIGNMENT.
NOTE
IVA-22