Century EB-4 Owner's Manual page 42

Section IVA- OPERATING INSTRUCTIONS
4A.3 WHEEL LIFT TOWING PREPARATION (cont'd)
(d) Due to the position of the disabled vehicle, it may be necessary
to tilt the wheel lift to obtain the proper position for pick-up.
This is accomplished by use of the WHEEL LIFT FOLD "UP-
DOWN" Control.
MAKE CERTAIN THE PARKING BRAKE IS ENGAGED AND THE
TRANSMISSION IS IN GEAR (PARK) ON THE VEHICLE TO BE
TOWED BEFORE THE WHEEL LIFT CROSSBAR IS ENGAGED.
(e) After all preparations have been made as illustrated, back the
wheel lift until crosstubes are against tires of vehicle to be
towed. Take truck out of gear and apply parking brake.
(f) Lower wheel lift to ground and extend boom until it is firmly
against tires of disabled vehicle. See Figure 4A.5.
WHEEL LIFT (cont'd)
NOTE
FIGURE 4A.5
IVA-4