Safety Information; Symbols And Icons - Parkside PRMA 20-Li A1 Translation Of The Original Instructions

GB IE
Noise level specifi cation (L
measured ...... 86.0 dB(A); K
guaranteed ........................... 88 dB(A)
Vibration (a ) ....... 0.69 m/s
h
Temperature.......................... max. 50 °C
Charging process ...................4 - 40 °C
Operation .......................... -20 - 50 °C
Storage .................................0 - 45 °C
Attention! An up-to-date list
of battery compatibility can
be found at:
www.lidl.de/akku
The device is part of the Parkside X 20 V
TEAM series and can be operated with
batteries of the Parkside X 20 V TEAM
series.
Batteries of the Parkside X 20 V TEAM
series may only be charged using chargers
of the Parkside X 20 V TEAM series.
We recommend that you operate this ap-
pliance with the following batteries only:
PAP 20 A1, PAP 20 A3.
We recommend charging these batteries
with the following chargers: PLG 20 A1,
PLG 20 A3, PDSLG 20 A1.
PLG 20 A1 PLG 20 A3
Charging
time (min.)
PAP 20 A1
PAP 20 A3
120
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
22
)
WA
=1.96 dB
WA
; K=1.5 m/s
2
PDSLG 20 A1
60 30
60
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
2
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration of
conformity.

Safety Information

This section covers the basic safety
regulations when working with the
electric lawnmower.

Symbols and icons

Symbols on the device:
Attention!
Read the instruction manual
carefully.
Danger of electric shock!
Risk of injury due to ejected
parts
Keep persons in the vicinity
away from the device