Table of Contents
Advertisement
5 SINGLE TEST
5.1 DEFAULT SMOKE TEST
1
After you have completed the preparation
procedures, Testifire will be ready for use.
Select smoke test from the main menu by
moving the cursor to Smoke.
Smoke
Heat
CD
Status
NOTE
With smoke selected, pressing the status
key will display the smoke capsule level.
Smoke Status
Capsule Level
A test cannot be carried out if the
capsule is empty
CAPSULE LEVEL SYMBOLS:
X Capsule Problem
!
Capsule Level Low
� Capsule Empty
Smoke�
►
Heat
CD
Menu
Status
2
An infrared beam across the clear cup
controls the test. The test will begin
automatically when the head unit is
placed over the detector, breaking the
infrared beam.
The test LEO will flash Blue to indicate
that smoke is being generated. The
status LEO will flash fast Green to show
test in progress
"'
íl
NOTE
During a smoke test a slight 'popping'
sound may be heard. This is normal and
part of the test procedure.
íl
NOTE
X ,..
The amount of smoke produced may
very throughout the test
3
When the detector is activated,
remove Testifire by lowering it gently.
Testifire will return to idle.
I
NOTE
lf after 2 minutes the test has not
completed, Testifire will time-out. highlighted
by the status LEO flashing Red/Green
www.sdifire.com/testifire
I
13
Advertisement
Table of Contents
