Console Switches; General - jcb 457 Operator's Manual

General

The console switches may change according to machine specifications. Some are used as options.
Each switch has a graphic symbol to show the function of the switch. Before you operate a switch, make sure
that you understand its function.
The push button switches symbol lights up to show that the switch function is active. If there are more than one
option active two lights are shown by the two red LED (Light Emitting Diode)'s.
13
15
17
19
27
21
The indicator lamp on the button will illuminate to indicate that the switches are on in position.
1. Road light switch: The switch functions operate when the ignition switch is in the off position. The button
turns on the machine's front and rear side lights. A second press will turn off the side lights along with the
headlamps and worklamps.
2. Headlight switch: The switch function operate when the side lights are on and the ignition switch is in the on
position. The button turns on the machine's front headlamps. A second press will turn the headlamps off.
3. Beacon switch: The switch functions operate when the ignition switch is in the off position. The button turns
on the machine's roof-mounted rotating beacon. A second press will turn the beacon off.
4. Rear fog light switch: The switch function operate when the headlamps are on in position. The button turns
on the machine's high-intensity read fog lamp. A second press will turn the fog lamp off.
18

Console Switches

Figure 13.
14
16
18
28
20
24
23
22
9821/3700-4
1
3
5
7
9
11
26
25
About the Product
Console Switches
2
4
6
8
10
12
18