Table of Contents
Advertisement
A machine built to the ROPS (Roll-Over Protective Structure)/FOPS (Falling Object Protective Structure)
standard has a data plate attached to the inside of the cab.
If the machine is used in any application where there is a risk of falling objects then a FOPS must be installed.
For further information, contact your JCB dealer.
The FOPS has a data plate attached. The data plate indicates what level protection the structure provides.
There are two levels of FOPS:
•
Level I Impact Protection - impact strength for protection from small falling objects (e.g. bricks, small
concrete blocks, hand tools) encountered in operations such as highway maintenance, landscaping and
other construction site services.
•
Level II Impact Protection - impact strength for protection from heavy falling objects (e.g. trees, rocks) for
machines involved in site clearing, overhead demolition or forestry.
10
Product and Component Identification
Figure 7.
9821/3700-4
About the Product
10
Advertisement
Table of Contents
