Security Information; Definitions Of Warning Words And Symbols; Reporting Deadlines; Additional Documents Providing Security Information - XS Temp74 PT100 Vio Instruction Manual

Security Information

• Definitions of warning words and symbols

The safety information in this manual is very important in order to avoid personal injury, damage to the instrument,
malfunction or incorrect results due to non-compliance. Please read this manual carefully in its entirety and make
sure you familiarise yourself with the instrument before you start working with it.
This manual must be kept close to the instrument so that the operator can refer to it if necessary.
Safety instructions are indicated by warning terms or symbols.

• Reporting deadlines

WARNING for a medium-risk hazardous situation, which could lead to serious injury or death if not avoided.
WARNING
for a hazardous situation with reduced risk which, if not avoided, may result in damage materials,
loss of data or minor or moderate injuries.
NOTICE for important product information.
NOTE
for useful product information.
Warning symbols:

• Additional documents providing security information

The following documents can provide the operator with additional information to work safely with the measuring
system:
• specific notes on product safety.

• Intended use

This instrument is designed exclusively for temperature measurements both in the laboratory and directly in the
field. Pay particular attention to the technical specifications in the table INSTRUMENTAL CHARACTERISTICS /
TECHNICAL DATA; any other use outside these is considered unauthorised. This instrument left the factory in
perfect technical and safety condition.
Attention
This symbol draws attention to a possible danger from electric current.
Attention
The instrument must be used according to the instructions in the reference manual.
Read the instructions carefully.
Attention
This symbol indicates a potential risk and warns of proceeding with caution.
Notes
This symbol highlights further information and tips.
Notice
This symbol draws attention to possible damage to the instrument or instrumental
parts.
4
UM Temp74 PT100 Vio EN rev.1 19.05.2023