Table of Contents
Advertisement
If you assign a value for more Core Ratio Limit, do not set the less Core Ratio Limit to
[Auto].
Min. CPU Cache Ratio [Auto]
Allows you to set the minimum possible ratio on the Uncore part of the processor. Use the
<+> or <-> keys to adjust the value. The values depend on the CPU installed.
Max. CPU Cache Ratio [Auto]
Allows you to set the maximum possible ratio on the Uncore part of the processor. Use the
<+> or <-> keys to adjust the value. The values depend on the CPU installed.
Internal PLL Overvoltage [Auto]
This item allows you to enable the internal PLL Overvoltage for K-SKU CPUs to get the
extreme overclocking capability.
Configuration options: [Auto] [Enabled] [Disabled]
CPU Ratio Tuner [Auto]
Enable this item to enhance the performance of non-K series CPUs. Configuration options:
[Auto] [Enabled] [Disabled]
BCLK Frequency : DRAM Frequency Ratio [Auto]
Allows you to set the BCLK frequency to DRAM frequency ratio.
[Auto]
[100:133]
[100:100]
DRAM Frequency [Auto]
This item allows you to set the memory operating frequency. The configurable options vary
with the BCLK (base clock) frequency setting. Select the auto mode to apply the optimized
setting.
Configuration options: [DDR3-800MHz] [DDR3-1066MHz] [DDR3-1333MHz] [DDR3-
1400MHz] [DDR3-1600MHz] [DDR3-1800MHz] [DDR3-1866MHz] [DDR3-2000MHz] [DDR3-
2133MHz] [DDR3-2200MHz] [DDR3-2400MHz] [DDR3-2600MHz] [DDR3-2666MHz] [DDR3-
2800MHz] [DDR3-2933MHz] [DDR3-3000MHz] [DDR3-3200MHz] [DDR3-3400MHz]
Xtreme Tweaking [Disabled]
This item may help improve some benchmarks performance. Configuration options: [Enabled]
[Disabled]
Max. CPU Graphics Ratio [Auto]
Allows you to automatically optimize the CPU Graphics Ratio or manually set a value for an
optimal CPU Graphics Ratio. Use the <+> or <-> keys to adjust the CPU graphics ratio. The
minimum value depends on the installed CPU.
The ratio may vary depending on the system loading.
3-10
The BCLK frequency to DRAM frequency is set to the optimized settings.
The BCLK frequency to DRAM frequency ratio is set to 100:133.
The BCLK frequency to DRAM frequency ratio is set to 100:100.
Chapter 3: BIOS setup
Advertisement
Table of Contents
